+370 (690) 99779
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads . Each output is switched via a bistable relay and can also be switched on the actuator by the mechanical manual control. The status of the switching channel is directly visible. The MDT Switch Actuator is suitable for extreme high inrush currents and used for heavy loads (C-Load). The outputs are set individually via ETS. The device provides extensive functions like logical operation, status response, block functions, central function, delay functions and staircase lighting function. Additionally the device provides several time and scene control. If the mains voltage fails, all outputs hold their current position. After bus voltage failure or recovery the relay position is selected in dependence on the settings. The MDT Switch Actuator has separate power supply terminals for each channel. It is a modular installation device for fixed installation in dry rooms. It fits on DIN 35 mm rails in power distribution boards or closed compact boxes.
• Production in Germany, certified according to ISO 9001
• Comprehensive function extension
• Mechanical manual operation for direct actuation of the relay contact, status visible
• NO and NC contact operation
• Status response by manual operation
• Time functions (switch-on/switch-off delay)
• Extensive staircase light and impulse functions
• Extended logical and scene functions for each channel
• Extended status functions (inverted, cyclic, at block)
• Treshold switch (Byte/2 Byte/2 Byte float)
• Hour meter for switching
• Priority/forced operation with automatic release time
• 4 mm² / 2×2,5 mm² screw terminals. Separate supply phases
• Power supply via KNX bus
• Quick application download (long frame support for ETS 5/6)
• Modular installation device for DIN 35 mm rails
• Integrated bus coupling unit
• 3 years warranty